
Perform full hot-swap and fault injection with the latest GEN5 PCIe SFF/U.2 drives.
使用最新的 GEN5 PCIe SFF/U.2 驱动器执行完全热插拔和故障注入。
The module has full control over power, data (dual port) and present pins, allowing simulation of any possible hot-swap scenario. Individual control of each signal, pin bounce and high speed glitching combine to greatly increase the number of test cases you can perform. ‘Driving’ is available on some sideband pins, allowing a range of additional tests to drive signals high/low rather than just disconnecting them. The ‘+Triggering’ version has an additional MCX trigger IN/OUT to sync with external test equipment.
该模块可以完全控制电源、数据(双端口)和当前引脚,允许模拟任何可能的热插拔场景。每个信号的单独控制、引脚弹跳和高速故障相结合,大大增加了您可以执行的测试用例的数量。 “驱动”在某些边带引脚上可用,允许进行一系列附加测试来驱动信号高/低,而不是仅仅断开它们。 “+触发”版本有一个额外的 MCX 触发器输入/输出,用于与外部测试设备同步。
The drive modules can be used individually, for simple bench testing or to automate an entire storage enclosure with multiple units.
驱动器模块可以单独使用,用于简单的台架测试或使具有多个单元的整个存储机柜实现自动化。
Each drive module requires one port on a Torridon Controller.
每个驱动模块都需要 Torridon 控制器上的一个端口。
NOTE: We recommend evaluating this product in your test system before purchase
注意:我们建议在购买前在您的测试系统中评估该产品
